Quote:
Originally Posted by Wayno
@ ztan My idle is around 0.28 and up to 0.33 when AC is on. Would I need to zero 0.3 column in addition to 0.2? |
If you're getting dip at 0.33 load with AC, I'd try zeroing up above that (or change the scaling axes so 0.2 reads 0.35 or so). If you're not getting a big dip, don't worry about it.
As an aside, I just put on a 3" overpipe back x-force exhaust and my idle has been smoother again (as well as a bit louder).