Quote:
Originally Posted by DieselDog
Anyone else have some input on this? Im looking for exact measurement values.
|
Here are the factory specs.
The issue lies in that you'll gain a fair amount of negative camber just from the lowering springs. I have RCE Yellows and my rear camber is at -2, without any LCAs or adjustment bushings. Your Sportlines go lower, so you'll probably be around -2 to -2.5 in the rear. If you want to go anywhere other than what the springs get you, you will need LCAs.
In the front, I used camber bolts in the upper hole set to maximum camber, and ended up with -1.7. I could probably turn the bolts the other way and take the camber back down to OEM spec.
Next question is why do you want to go back to OEM spec vs. a more performance-oriented alignment?