[pszuvela]

Hey guys,


I've been battling this pesky leaky cam plate issue for over a year now. I've had it into the dealer 3 times only to have it leak on the way home from the dealer the last time! At that point I decided to buy the Nameless Performance Cylinder Head Cover/Oil Leak Delete Kit.


I removed the stock plate and cleaned the mating surfaces with a red brillo pad, which works great for removing RTV gasket material while being less chemically than a solvent and less abrasive than a putty knife. I had the car on my lift so I had a great view from underneath the car to make sure all the surfaces were clean. It still leaked. Nameless even sent out a second plate to see if the first one was the issue but it still leaks.


My question is this:
Has anyone had a similar experience trying to eliminate this leak and if you were able to stop it, how did you do it?


I've read up on this topic quite a bit over the last year and have read through most of the threads on this forum pertaining to it but I haven't seen anyone have the problem AFTER installing an aftermarket plate such as Nameless or Raceseng.


PLEASE HELP


- Pete