Quote:
Originally Posted by P5yk0t1c
Hey guys,
I am very new to this whole tuning thing. I have ordered an OFT and I have the following installed:
- UEL header
- EVO 3 Catback
- Injen CAI
Which map should I be using? I am assuming the stage 2 93oct? Also I am from Canada and I am 3,500ft above sea level will this require tweaking my AFR (or other settings)? or should I just install everything and then capture a log? Who would I send that too in order to check if everything is running ok. This is my only car and I am very worried I am going to f something up and destroy the engine.
|
The only thing that may cause issues is you intake, injens and many other intakes alter the calibration of the mass air flow sensor MAF, this can effect fueling to you engine and cause hesitation or rich\lean conditions. Unlikely to blow anything up but may not run smooth or efficiently. If your concerned put stock intake back on, then once you are comfortable with logging and maf scaling put your intake back and rescale maf sensor see links below
ecu will compensate for altitude changes it has pressure sensor