When you first receive your Solo DL, follow these steps:
- Install the Race Studio Software
- Plug in your AIM Solo DL to your computer, and turn it on
- Open RaceStudio
- Click Device Configuration
- Select ECU Manufacturer to be Toyota
- ECU Model should be set to GT86/Scion_FRS
- Set sampling frequency to maximum for all channels
- Change measurement unit to the unit of your choice.
- *transmit the changes to your AIM Solo DL* (thanks @
dp1 for catching this important step)
When you get to the track:
- Turn on your unit, and give it a minute to lock onto GPS Satellites
- Make sure the unit has a clear view of the sky (through glass is okay)
- Select your track
Have other questions? Ask away!
Need a data log analyzed? Please PM me with the information your looking for and/or what your objective is with me analyzing your log. Rates are VERY affordable.