Quote:
Originally Posted by Harro
So this is one of my first posts here, thought I would post up a FI log.
I aplogise that the data channels weren't the best, it was a rush to get on the track and I didn't think driving around the track fidiling with the data logger was the best idea 
http://www.datazap.me/u/harro/willow...5?log=0&data=8 |
Does not look to bad , although i am no good on fi stuff.
Bit of knock flkc up to -1 degrees so not to bad, Check what your IAM is as you did not log it , should be 1. You could maybe pull a some timing out of the base timing B map where your seeing knock to be safe especially if your going to track regularly.
The oil temps are about 235 c and its been pretty cool in brissie, are you running an oil cooler and 10W30 or 10W40 oil ? as 225C is about the max temp you want to see on 0W20 oil.