Quote:
Originally Posted by Bader
I hate being a bother but can someone check this log for me? I would appreciate the input. It's OFT OTS 2.63 93 Octane timings run with our 98 Octane. I did the pull about 15 minutes after cruising on the high way.
http://www.datazap.me/u/baderebra/93...6-7-9-10-13-14
|
Yes bit of knock fair bit in some areas
take note of rpm and load where its occurring and pull about half the correction value out of the base timing b map. running the 91 map wont fix it as the only change is timing over 5000 rpm reduced by about 1 degree.