Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

crazyfrenchbiker · 04-17-2015, 09:27 AM

How do you size your wastegate setup? I'm running a Turbosmart comp gate 40 paired with a GTX3076R and seeing consistent boost creep under WOT.

I am only running spring pressure of 7psi, but by the end of a WOT run, I have creeped to 10psi.

Also I have worked this out in my head, but an EBC wouldn't help with this either right, because once the EBC opens up, we're going to be essentially wide open WG?

Thanks

04-17-2015, 09:27 AM	#1
crazyfrenchbiker Hot Lava 6MT Join Date: Jul 2012 Drives: Hot Lava FR-S Location: Omaha, NE Posts: 398 Thanks: 19 Thanked 78 Times in 60 Posts Mentioned: 12 Post(s)	How to size wastegate How do you size your wastegate setup? I'm running a Turbosmart comp gate 40 paired with a GTX3076R and seeing consistent boost creep under WOT. I am only running spring pressure of 7psi, but by the end of a WOT run, I have creeped to 10psi. Also I have worked this out in my head, but an EBC wouldn't help with this either right, because once the EBC opens up, we're going to be essentially wide open WG? Thanks