Quote:
Originally Posted by CarzCarzCarz
Any specific reason they suggested that belt over the others?
I just replaced my old belt (it was making a squeaking noise) with another K061015, and it seem to fit fine. This is with 70mm pulley.
|
The K061015 is recommended for pulleys > 72mm. The K061010 is 12mm (1/2") shorter so that the tensioner is not so likely to bottom out. This is more of a problem with auto-blip and light flywheels. I ran the K061015 with a 69mm for about 2k miles. It broke shortly after upgrading the clutch/flywheel.