04-13-2015, 10:32 AM
|
#11
|
|
The Stig's African Cousin
Join Date: Apr 2014
Drives: 2014 wrb brz
Location: NJ
Posts: 720
Thanks: 1,547
Thanked 486 Times in 256 Posts
Mentioned: 4 Post(s)
Tagged: 1 Thread(s)
|
Quote:
Originally Posted by technoid
I think it would be helpful for parking. FYI I have let three people drive my car and it has been bumped twice, and not by me.
Thus said, I don't like anyone besides me driving it.
I have never touched it, been really close a few times.
Just think it would be a good idea, and for a few minutes time, a 10 dollar camera, a switch, rca splitter, and some wire. Why not. I may have $30 dollars and 30 minutes in installing it.
I already know that the camera and splitter will work, just need to test and connect the trigger to the radio, and mount the camera. From info on ae64 the radio reverse trigger is a +12v, so a momentary NO switch hooked to a switched hot and connected to the camera and radio should do it. But I will probably make a little circuit to isolate the two triggers and a seperate relay for the camera. Just to protect the Head Unit from excess current.
|
Ok that makes sense then because you are not the sole driver. I would personally put the button on the left side next to the leveling and trunk release buttons.
|
|
|