This may or may not be the best place to ask, but has anyone had any issue with the math not lining up for the Launch Control?
I've had it set at 3000 [7600-3000=4600] and that is right. I'm trying to set my launch control to 4000 (autox launch for minimal burnout when dropping the clutch) but if I set the delta at 3600, the launch control goes to 3600rpm, at which point the math doesnt work. I've tried in 100 RPM intervals and heres what I came up with:
Redline - Delta = Actual RPM at rev limit [what rev limit SHOULD be]
7600 - 3600 = 3600rpm [4000]
7600 - 3500 = 3900rpm [4100]
7600 - 3400 = 4200rpm [4200]
7600 - 3200 = 4400rpm [4400]
@
steve99 @
Shiv@Openflash