Quote:
Originally Posted by Kodename47
Well the generic way is to get MAF Scale = Commanded AFR. If you don't want that you can just adjust the fuel map to get the AFRs you want, or even the MAF scale to the same end. I'm surprised you're even in CL that high MAFv range. TBH I'd rather the OL range was better scaled than CL in the cross over regions due to the potential issues on tip in as you come out of CL operation. I actually use a combination of OL and CL in one go to do my MAF as it seems to be more reliable.
Which ROM are you on? Is the open loop fueling additive defined? You could always use that to make it leaner.
|
Yeah, that's what I figured with wanting the MAF scaling to be closest. I just didn't like the idea of a massive dip in the MAF scale. I did CL then OL in one go, which resulted in the big dip which I manually smoothed.
I'm working from OFT Stage 2 UEL 91 Octane v2.063. I remember seeing the open loop fueling additive, I think. I'm not at home so I'll have to try that tonight.
Thanks for the help so far!