[Kodename47]

Originally Posted by DocWalt

Well, unfortunately changing the primary open loop table just meant the AFR error was even higher since the commanded AFR changed but the actual AFR was the same.

Any tips? I'm sure I'm doing something wrong, heh.

edit: See this log from ~30 minutes ago: http://datazap.me/u/docwalt/04-09-15...mark=3530-3583

and this log from a few days ago: http://datazap.me/u/docwalt/04-06-15...mark=6761-6865

The commanded AFR changed, but the actual AFR was essentially the same shape and AFR error

Revert the open loop fuel map. It doesn't look like the MAF scale is that close to give the commanded AFR. Did you scale the open loop part of the scale as it looks like after 2.5V hasn't been done?