Quote:
Originally Posted by Patrick_B
Is this the correct procedure?
Someone please correct me if I'm wrong. Thanks!
1- Loosen top oem bolt
2 - Remove botttom bolt and replace with SPC bolt (SPC part # 81305)
3 - Remove top bolt and replace with bottom oem bolt
Are you pushing in the suspension towards the car re-tightening bolts?
|
The instructions from SPC did not include swapping the OEM bottom bolt into the top hole. Some forum members have done this on their own, others have swapped just the location for the SPC eccentric bolt, all with varying degrees of success, but all seemingly better than the SPC instructions.