Quote:
Originally Posted by Ernie L
With perhaps one exception, my hoses were labeled..The labeling is molded into the hose..You need good lighting..ps the longer smaller diameter hose with the 90 degree on the end does not go to the coolers as is implied by the picture in the instructions....it's for the front pvc to cold air inlet connection (spigot on the under side of the air inlet near the throttle body.)
|
Thanks for the tip! Where is the labeling on the hose? I saw the instructions mentioned the labeling was molded in, but I looked at 3 different hoses and didn't see anything... Maybe I'm looking in the wrong place?