Quote:
Originally Posted by steve99
P2096-(normal code I get from the header)
You should not get that code after installing header unless you have a leak near o2 sensor / intake leak or damaged 02 sensor.
Code you get for catless header is P0402 (cat efficiency)
Those other two code you had point to intake/exhaust leak or problems with post cat 02 sensor.
If the second 02 sensor is crook or disconnected it will generally cause cruise control to be inoperative but im not sure if it triggers traction light.
Check the plugs on the front/rear 02 sensors are seated correctly they are near alternator at front of motor. They are grey and black coded and the plug and socket colors should match.
|
Did you get your issue fixed I'm having the same issue but just the air to fuel ratio unbalance and no cruise control