Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

stevesnj · 04-04-2015, 03:50 PM

If you pre-load the axle and suspension before a hard launch it should reduce the heavy load on the CV cage. Also if you are racing, autocross or whatever and you don't turn of the VSC,TRC,and pull the ABS you are trying the spin the rear wheels when the nannies are trying to hold you back and thus putting even more stress on the bearing cage. I suggest pedal dance and pull the ABS fuse and if you have to make sure you pre-load the axles before you launch.

04-04-2015, 03:50 PM	#176
stevesnj Senior Member Join Date: May 2013 Drives: 2016 FR-S Oceanic Blue Location: Southern NJ Posts: 2,958 Thanks: 2,158 Thanked 1,601 Times in 923 Posts Mentioned: 30 Post(s) Tagged: 2 Thread(s)	If you pre-load the axle and suspension before a hard launch it should reduce the heavy load on the CV cage. Also if you are racing, autocross or whatever and you don't turn of the VSC,TRC,and pull the ABS you are trying the spin the rear wheels when the nannies are trying to hold you back and thus putting even more stress on the bearing cage. I suggest pedal dance and pull the ABS fuse and if you have to make sure you pre-load the axles before you launch. __________________ My 2016 Build thread TRD Exhaust with custom quad tips, TRD Lowering Springs,TRD Quick shifter,LED;DRL, Projectors, and turn signals. Re-badge, 86 Nanny, WinmaxW2 Pads, K&N Drop In, Antenna delete