[bryan767]

Nope, I originally purchased the 3mm for the fronts since I read someone having success, unfortunately I wasn't as lucky so they are on the rear now. 5mm will rub on full lock but won't poke. 10mm+ will poke and not rub, but you'll look like you're some turbo FWD car which looks dumb to me on a RWD car and it's not very great for handling.

Edit: I decided to go the coilover route (smaller diameter spring perch), I like the idea of no spacers or extended studs.


On a side note, just picked up 2" knockout conduct seals from lowes for center caps. you will need to wrap the prongs in some sort of tape - I used electrical - and you will have to pull the tabs outward to create a better/secure fit (if your paranoid you can also put a bit of superglue on the underside). However they are the perfect DIY center cap and only cost me 5$
Will be plasti dipping them black before I install. Pics to follow.