Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - FA500 vs Stance SS vs BC

manualmotive · 03-29-2015, 09:25 PM

So I'm currently just waiting for one of the following coilovers to be posted on a used parts forum: Fortune Auto 500, Stance SS, or BC (:/). Will all these coils have the same amount of max front camber adjustability with their top mount camber plates? Or will some offer more than others?

I'm already running whiteline camber bolts in the front but only getting -1.2 camber in the front. I'm looking to get at least -3 degrees out of the front when the coils go on. Will all of the coil options listed by fine for that or will I need additional mods?

And what about camber correction on the rear? I only want -1 to -2 degrees in the rear and I'm already getting over 2 of natural camber on Sportline springs (-1.5in). Most likely getting PBM RLCA's to deal with this though.

Looking to be dropped 2.5 inches all around, give or take a half inch.

Sorry for the weak ass thread but nothing helpful was coming up in the searches.

03-29-2015, 09:25 PM	#1
manualmotive Senior Member Join Date: Feb 2014 Drives: '14 BRZ Todoroki/OriginLabo Location: CA Posts: 139 Thanks: 18 Thanked 38 Times in 22 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	FA500 vs Stance SS vs BC - most front camber? So I'm currently just waiting for one of the following coilovers to be posted on a used parts forum: Fortune Auto 500, Stance SS, or BC (:/). Will all these coils have the same amount of max front camber adjustability with their top mount camber plates? Or will some offer more than others? I'm already running whiteline camber bolts in the front but only getting -1.2 camber in the front. I'm looking to get at least -3 degrees out of the front when the coils go on. Will all of the coil options listed by fine for that or will I need additional mods? And what about camber correction on the rear? I only want -1 to -2 degrees in the rear and I'm already getting over 2 of natural camber on Sportline springs (-1.5in). Most likely getting PBM RLCA's to deal with this though. Looking to be dropped 2.5 inches all around, give or take a half inch. Sorry for the weak ass thread but nothing helpful was coming up in the searches.