Quote:
Originally Posted by Agent 86
Where did you find that C clamp?
I removed the hub from my car today, only to discover that the studs supplied with my H&R 5mm spacers were only 2mm longer than the OEM studs! 
So now I need to find studs around 5 - 10 mm longer than stock, and a method for removing the stock studs. As a test, I tried tapping the stock studs with a hammer, and they didn't budge! :eye bulge: |
I just recently did one of my rears. I didn't remove the hub, just the caliper and rotor. Then grabbed a BFH and gave one good wack and out it came. Not too difficult to do.