Quote:
Originally Posted by Martyr03
finally got everything for this kit in the mail. just waiting till the beginning of may to install everything. inspection first, then install.
also, about to buy a laptop to do all the ecutek stuff. i havn't used a laptop in years since i put a ton of money into my gaming pc.
anyone have any insight on how the remote tuning works. i bought the fueling package from them. just want to get this car moving safe before the install(vacation) ends
|
Well the fueling package just comes with the EcuTek license, fuel injectors and base map (I think). I am pretty sure the cable and eTune service are separate, but do confirm. You'll need the cable to load any map, including the base. Remote tuning works just fine, it just happens at a slower rate than a dyno tune. You'll need an AFR gauge and preferably set it up to feed the signal into the secondary o2 sensor so the tuner can review AFR's below 12.
I log to a Windows 8 tablet PC (x86, not ARM) which works just fine. You just need two USB ports - one for the licence and the other for the cable. I use a hub since I only have one 3.0 port.
As far as how to do it, and what you need to do, its not too complicated. PTuning's staff or tuner will walk you through the process if you do eTune with them.