Quote:
Originally Posted by wparsons
Do you have a printout of your alignment? It looks like you have basically 0 camber up front. I have -2* up front and -2.05* in the rear with 17x8 +45, and they're nowhere near flush. Same width, and you're poking WAY more than 20mm more than I am.
|
No alignment sheet. Asked for it, but I wasn't the one who picked the car up from the shop, so no dice. The manufacturer of my coilovers claim the camber plates give -2* and my plates are maxed out. I'm just going off that. With slimmer tires I think I wouldn't have these issues. Might trade off for a 205 square set up or 215 in the back and 205 in the front