Quote:
Originally Posted by tazz786
Just got new tires and wheels installed as well as added Eibach pro kit to my firestorm FRS..nothing else had been done as far as camber/crash bolts ...After i got the alignment i noticed that the left rear camber says -2.0 and the right rear says -2.3 on this set up. Shouldnt the rear camber be the exact same? Is this something i should be worried about?
Tires i installed were 245 35 18 all around..wheels are XXR 527'S with 35 offset all around..also 10mm spacers in the rear both sides.
|
Camber is not the same in the rear from the factory. If I recall, mine was about .3 degrees off as well from driver to passenger side.
If you want to even it out, you're going to need rear lower control arms.