Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

tazz786 · 03-14-2015, 05:18 PM

Just got new tires and wheels installed as well as added Eibach pro kit to my firestorm FRS..nothing else had been done as far as camber/crash bolts ...After i got the alignment i noticed that the left rear camber says -2.0 and the right rear says -2.3 on this set up. Shouldnt the rear camber be the exact same? Is this something i should be worried about?

Tires i installed were 245 35 18 all around..wheels are XXR 527'S with 35 offset all around..also 10mm spacers in the rear both sides.

03-14-2015, 05:18 PM	#1
tazz786 Member Join Date: Feb 2015 Drives: 2015 scion FR-S Location: north carolina Posts: 61 Thanks: 5 Thanked 17 Times in 11 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Camber after alignment Just got new tires and wheels installed as well as added Eibach pro kit to my firestorm FRS..nothing else had been done as far as camber/crash bolts ...After i got the alignment i noticed that the left rear camber says -2.0 and the right rear says -2.3 on this set up. Shouldnt the rear camber be the exact same? Is this something i should be worried about? Tires i installed were 245 35 18 all around..wheels are XXR 527'S with 35 offset all around..also 10mm spacers in the rear both sides.