Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - Gauging interest in Plug n Play option for BRZ Boomerang to turn ON with DRLs....

Elkton86er · 03-08-2015, 04:22 PM

Installed mine today. Worked great right out of the box. I saw @Trap63's note about the black relay wire after I was done. Went back and took a look and I think in my case the way I've got things tied up I need the black wire to be a few cm longer for it to work better via the engine side. When you slide the side panel back on it will tend to pull on the wire. I decided to put it back the way I had it - I used a little piece of electrical tape to both protect the wire and lodge it into a groove to keep the wire in place as the fuse box lid is replaced.

Thanks @DiodeDynamics for a great product!

03-08-2015, 04:22 PM	#907
Elkton86er Member Join Date: Oct 2014 Drives: 2014 Subaru BRZ Limited WRB AT Location: Elkton, MD USA Posts: 94 Thanks: 94 Thanked 24 Times in 21 Posts Mentioned: 2 Post(s)	Installed mine today. Worked great right out of the box. I saw @Trap63's note about the black relay wire after I was done. Went back and took a look and I think in my case the way I've got things tied up I need the black wire to be a few cm longer for it to work better via the engine side. When you slide the side panel back on it will tend to pull on the wire. I decided to put it back the way I had it - I used a little piece of electrical tape to both protect the wire and lodge it into a groove to keep the wire in place as the fuse box lid is replaced. Thanks @DiodeDynamics for a great product! __________________ 2014 Subaru BRZ Limited WRB AT Cosworth Drop-In Air Filter, Diode Dynamics DRL module, Perrin Tips