[Jetbill]

Although I'm only running 3.2 degrees, I was able to get almost 4 degrees up front with spc camber bolts up top. One thing I noticed was the camber bolts only went in one direction in the tein coilovers, one hole size is larger allowing it to be inserted in in position.

Originally Posted by Churg

Hey guys,

I bought some Tein SRC's, installed them, and went to a local alignment shop to get my car taken care of. However, the shop had some serious issues working on getting my camber to -3 like I wanted. Now, I don't know much about setting camber. I know that moving around the little bolts in the camber plate adjusts the camber, but that's about it.

Here's before their adjustment, at -1.7 camber:


And here's after their adjustment at -2.0:


I am 99% sure that I've installed the coilovers correctly, and I'm guessing that the guy aligning my car doesn't know how to adjust this properly, and because of my lack of knowledge on adjusting camber, I had to basically stick with -2.0, and for a competitive car in STX, I'd like to be sitting at -3.2 or so.

I also wanted to give a shout out to @CSG David for being so helpful and responding to my emails so fast while I was at the shop, I was really impressed.