Quote:
Originally Posted by manonastick
I should make it clear for people.
You can re-drill the rear rotor and it will fit fine
The front you "will" need to change the calipers and rotors because the stock front rotors cannot fit into the Megan/hardace hubs( 145mm diameters of the hub as mentioned) cause its too small making it physically impossible to retro fit with our front rotors with them (139mm hub diameter)
The OP has mentioned a few methods and i think the legacy 2012+ front brake kit is your cheapest bet if your keen
|
I cannot find 2012+ legacy front brake kit...and I don't want to drop 3k on the Brembo brake kit...granted that's for all 4...what else can be used?
Can I just swap the rotor and retain the same brakes?
Also the rear what rotor do I buy? I'm not a fan of re drilling them...