Quote:
Originally Posted by Sigh-on-Rice
Maybe they didn't do step #2 on page 5 of TSB? When they did mine, they specifically said in the work order that they flattened the sheet metal and put touch up paint on them. I think if the crack was caused by this sheet metal and this sheet metal (root cause) is not flattened, the newly replaced tail light housing will get cracked again.
|
Interesting, they told me there was no TSB for the tail lights. The work order says:
Installed lens and body both sides
Installed packing both sides
Installed nut flg m5
Inspected and replaced both rear lens and scraped off old body seals and straightened both side mounting holes.
Nothing about touch up paint or sheet metal, unless that is referring to the mounting holes. They also never mentioned anything about the tail lights actually being cracked.