Quote:
Originally Posted by steve99
LC/FFS is a code patch in the OFT rom , to be able to access the tables for LC/FFS you would have to copy the relivant xml code that defines those tables from the oft rom to kodename47 roms.
|
Ok thanks, found it.
These are the tables:
Code:
<table name="Launch Control Disable Speed" storageaddress="BAD50" />
<table name="Launch Control RPM Delta" storageaddress="BAD54" />
<table name="Flat-Foot Shift RPM Delta" storageaddress="BAD58" />
and
Code:
<table type="2D" name="Launch Control Disable Speed" category="Alpha - BRZ - FFS/LC" storagetype="float" endian="big" sizey="1" userlevel="4">
<scaling units="Vehicle Speed (Km/h)" expression="x" to_byte="x" format="#" fineincrement="1" coarseincrement="5" />
<table type="Static Y Axis" name="" sizey="1">
<data>Disable above</data>
</table>
<description>Launch Control will be disabled above this speed</description>
</table>
<table type="2D" name="Launch Control RPM Delta" category="Alpha - BRZ - FFS/LC" storagetype="float" endian="big" sizey="1" userlevel="4">
<scaling units="Engine Speed Delta" expression="x" to_byte="x" format="0" fineincrement="1" coarseincrement="100" />
<table type="Static Y Axis" name="RPM Delta" sizey="1">
<data></data>
</table>
<description>This table sets the required RPM delta for launch control to activate: redline (7600) - delta = launch control activated RPM</description>
</table>
<table type="2D" name="Flat-Foot Shift RPM Delta" category="Alpha - BRZ - FFS/LC" storagetype="float" endian="big" sizey="1" userlevel="4">
<scaling units="Engine Speed Delta" expression="x" to_byte="x" format="0" fineincrement="1" coarseincrement="100" />
<table type="Static Y Axis" name="RPM Delta" sizey="1">
<data></data>
</table>
<description>This table sets the required RPM delta for launch control to activate: redline (7600) - delta = FFS activated RPM</description>
</table>
Finaly I can ditch those old OFT XMLs and work with proper updated stuff.
Thanks alot