|
HELP: Rydeen Duo and Beatsonic BU Cam Adapter
Losing my mind here, bear with me. Trying to set up my backup camera using the Beatsonic BSU52 and Rydeen ZH07-150B.
Installing the camera itself was a breeze...all the wires come together to a connector. It's the rest of the harness I'm having the issue with. Bold are the parts I need help on...
On the camera side/back of the car (Rydeen harness):
-Connector for the camera [easy]
-"reverse light power+"[assuming this goes to the hot wire on the reverse lights?][EDIT: found some info for this and the ground saying with the OEM radio I just tape these off...can anyone confirm?]
-ground [duh]
On the radio side/front of car (Rydeen harness):
-yellow RCA [duh]
-red "reverse power anode output" [connects to white wire on Beatsonic harness?]
On the radio side/in dash (Beatsonic Harness):
-inline 16-pin harness [duh]
-yellow RCA [duh]
-white wire with female bullet connector "camera power" [is this the one that attaches to the red "reverse power anode output" from the camera harness?]
-red wire "ACC" [do I really have to locate and splice into an ACC power source? really?]
-random purple wire with connector pin on the end ["for some models"]
I've got a pretty good grasp on automotive electronics but I've never played with anything like this before...
__________________
2013 Sc10n FR-S 10 Series #1867 of 2500
in the garage...2001 Toyota 4Runner [Solid Axle Rock Toy], 1987 Pontiac Fiero GT [Shitwagon], 2004 Honda Interceptor VFR800 [daily rider], 1978 Suzuki GS750 [Café Racer]
Last edited by Silver Ignition; 03-03-2015 at 06:15 PM.
|