Quote:
Originally Posted by swarb
heat gun to bend back, or swap with the passenger side. If all else fails, go to dealer, junk yard or remove both sides so they match, for weight savings, because racecar.
|
Quote:
Originally Posted by WesleyG
I had to scroll back up to make sure this wasnt a squadrogue thread.......
|
Quote:
Originally Posted by bass_114
hey I'm from montreal too... When i get a passenger in the back they always end up breaking them  .... so i went race car and removed for weight reduction |
Quote:
Originally Posted by Tcoat
This is yet another case of a major defect being hidden from us by the dealers! Since there are two cases here this horrible issue must be rampant and we should start a class action sit immediately! I would take the car back and demand a new one and if they refuse then get a team of 26 lawyers and try to take Toyota for everything they own!
Or...
If you don't have a heat gun just use a hairdryer and it pops right back in place.
|
Okay I will reply to all of you once instead individually. Your post are funny =p
I will use a blow dryer, heat guns are too powerful for that... Thank you guys!