Quote:
Originally Posted by steve99
Just a thought if you using an OFT and Romraider definition from Github or OFT site those definitions are in Imperial ie psi not metric bar.
@ Kodename47 has done some metric definitions.
did you convert map sensor bar to psi ?
the OFT Vortech SC tune uses Omni 2.5 bar MAP sensor
the setting in that rom are
Multiplier (psi absolute/v) = 7.251
Offset = 1.450
Did increase MAF limit max (g/s) NA roms its 200 vortech SC rom 500
I know nothing about SC/Turbo tuning just some suggestions.
Also noticed on Techstream your Calculated engine load is 100% maybe your hitting a load limiter ?? |
i rescaled map sensor to the values given to me, it is the denso/honda map sensor i'm using, the same sensor they use with the ecutek kits.
my maf limit max is also 500
my maf scaling map just goes to 315 right now, i have not seen values over 300 yet.
engine load limit max is set at 4 g/rev
i did not convert the rom or xml to metric values, i'm still using the xml that comes with the oft 2.063 package (2.07 ZA1J700G)
how do i convert it to metric? adjust the whole XML file?