Quote:
Originally Posted by Kodename47
I take it that you're using G series ROMs being in Europe. What software are you using to tune? I know that some of the Rotrex kits need to be SD mapped, or at least are hard to map using MAF alone from what others have said.
There are 3 manifold pressure sensor scaling tables, have you changed them all?
BTW, if you're using Romraider I have some decent A01G/A02G ROM definitions which are compatible for Euro cars (I'm in the UK). Use the A01G definition if using OFT files, if using completely stock original ROMs then use the correct one. Both can be found here. Stock ROMs can be found here
How much DI are you running and what does your ratio table look like? How do you know it's at 100%? |
yes we have the 700G rom and i started from the OFT stage2 EL 2.063
I'm using romraider to tune
i just changed the map sensor scaling in 1 place , didn't find other places? can you guide me to where they are? i changed the "manifold pressure scaling" under the "manifold pressure sensor" tab.
i also rescaled the fuel and ignition maps to 2.25 in the load scale.
DI injection maximum is now 100% in the full map and GDI pressure target is 20Mpa above the 100 on the load axxis.
i use the Toyota techstream program for logging.