Quote:
Originally Posted by Lee@JDLAutoDesign
Any aftermarket X.XX" pipe should be the same, give or take the material thickness. At any rate, you wont see an issue like this unless you have a gross difference in size with the downstream pipe being the smaller of the two.
The EL headers i have seen in person didnt seem to have any clearance issues. Ill ask Ronnie and/or Jesse to comment on this since they have personally installed quite a few. Youre fighting radiant heat here so heat shields, reflective tape, etc can all be very effective  |
Alright sounds good. My concern at this point is if the guys with thermal coatings are having this issue, does that mean it is pretty much necessary to get a coating on top of the reflective tape, etc?