Quote:
Originally Posted by PandaSPUR
Is there any way for me to check if my harness has this issue before I bother trying to install it? (I was going to install on sunday).
Can I just look at which color wires are going into which pins?
|
If you want to remove the tape, you can check- each wire should go directly from one pin to the other, i.e., pin 4 to pin4, pin 5 to pin 5, etc.
Also, for anyone else reading too:
If the problem is that the DRL is not coming on at all, please make sure the DRL is supposed to be coming on to begin with! You must have the vehicle started and running. Autos must be in D, manual must have ebrake down. You might need a friend to look and see. Please be safe when testing.