Quote:
Originally Posted by PandaSPUR
This is what makes me want to try again with a harness purchased elsewhere. The harness I got this time was not in any packaging at all and the ends of the wires weren't pre-crimped like I've seen in most pictures here. Makes me wonder if I just had bad luck and got a shitty harness. Cause its not like I dont know how to remove the pins, some just freaking refuse to come out even though I SEE the retainer clip pushed all the way up and against the top of the connector =.=
|
I know what you mean.. I re-pinned Metra harnesses on a few occasions and the pins always slide right out. On the Chinese harness, I lifted the little plastic lever but for the reason the pin doesn't want to come out. Out of frustration I ended up pulling so hard that the wire broke. I then took pliers to the pin and yanked it out then soldered the wire back together. But yea, Metra's are cheap to begin with so I'd just order that and call it a day.