Quote:
Originally Posted by AZP Installs
+1
Also we've seen issues where the same shop keeps aligning the car over and over and every time it has the same results. I would try a different shop. Additionally I would think about getting corner balanced as well.
Anytime you lower one of these cars, you want to have the LCAs installed. As for the changing alignment during driving, it could be the machine doing the reading is off every time or something could be slipping. We've heard tons of complaints about the SPC arms slipping, however we've installed probably 20-30 sets of them, including on our own track car as well as lots of customer cars who drive in NYC. None of them have slipped or changed alignment settings between checks.
-Mike Paisan
Maintaining, Modifying and Educating TriState Enthusiasts since 2001.
Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) |AIM: AZP Installs
"Race Tested, Enthusiast Approved!" |
Yes, i made these 5 alignments at 3 different shops
, only one of them seemed like paying attention, so continued with them for the last two.
Unfortunately i couldnt find any place that does corner balancing in China, maybe there is but need to know (read and write) Chinese to find it from internet.