[thatfilipinoguy]

Hey guys!

So, I looked through google, and on this site with no luck. I am not looking to drill out the holes on the wheels. I am looking to remove more material on the voids (spaces between the holes on the back side of the wheel) to clear the stock studs since I have spacers. The amount removed would be no more than a 1/4".

If I do get this done I will be bringing it to a machine shop.

My other option is to get 5mm spacers and put them in between the wheels and the spacers I already have on the car. I am looking for your guys' input.

I am open to suggestions as well. This is just a general question since I couldn't find anything regarding my issue.

Thanks guys!