Quote:
Originally Posted by KevinA
Here in the UK we have mixed figures in both WHP and Flywheel, is there a definitive conversion from WHP to crank hp.
Thanks and good reading  |
mate suggest you read post here
http://www.ft86club.com/forums/showthread.php?t=81493
all dynos read different rough guide stock 86 on dynapac will read about 170 wheel hp and the manufacturer rates them at 200 at flywheel so aprox 15 to 20 % loss through drive train
the only sure way is to compare a stock and modded car on same dyno same conditions and look at percentage gain.