View Single Post
Old 01-30-2015, 12:17 AM   #525
DarkSunrise
Senior Member
 
DarkSunrise's Avatar
 
Join Date: Apr 2012
Drives: 22 BRZ (Previously 13 FR-S)
Location: USA
Posts: 5,798
Thanks: 2,187
Thanked 4,243 Times in 2,221 Posts
Mentioned: 48 Post(s)
Tagged: 2 Thread(s)
Quote:
Originally Posted by FRSBRZGT86FAN View Post
Not joining in on this fight but....

It's amazing that the FR-S power to weight ratio is 0.0725163162~0.073 for good measure, 7 hp for every 100 lbs

If the miata does end up weighing 2200 lbs it would only need 155 hp to be relatively equivalent to the FRS at 0.0704545455 i around 7 hp per every 100 lbs.

So anything essentially greater than 155 hp to that 2200 lb prediction will surpass the FR-S
Not to split hairs, but it'd basically need 160 to match and above 160 to surpass. That's the beauty of an estimated 2200 lb. curb weight (not to mention handling and fuel economy benefits).

Edit: Also more noticeable to typical drivers, with a 2.0L DI engine, it should beat the torque-to-weight ratio of the Twins, so the low-midrange will feel peppier.
__________________
"Never run out of real estate, traction, and ideas at the same time."

2022 BRZ Build
2013 FR-S Build

Last edited by DarkSunrise; 01-30-2015 at 12:28 AM.
DarkSunrise is offline   Reply With Quote
The Following User Says Thank You to DarkSunrise For This Useful Post:
YukiHachiRoku (01-30-2015)