Installed RCE hollow sway bars front and rear, used whiteline adjustable end links on the front, OE end links in the rear until I devise a plan B for that. Also installed the Raceseng Cascam front strut top mounts and the RacerX rear lower control arms. Still on the docket is the Grimmspeed lightweight crank pulley. I have acquired a steel pipe that is 24" long to extend my breaker, if this doesn't work, I will come up with a plan C for that. Also on the short list is I have replacement LEDs and front side marker housings; the ones I had turned into a fishbowl on the drivers side and nuked the LED I had. Also, learned the hard way that the drive into my father's property out in the middle of nowhere destroys undercarrages and damaged the wiring for my horns, so that will need to be fixed as well.
Apologies for the paragraph, don't forget your reading glasses!
