Quote:
Originally Posted by Burrcold
No it does not.
|
This is what I was going off of, not sure if it is true or not. He did post pics, would be a lot of trouble to go to just to disappoint some BRZ owners.
Quote:
Originally Posted by ebgs500e
For All Who Are Looking To Add Sound Proofing To Your BRZ. Here Is What I Found So Far In The BRZ.
doors: From The Factory, there Are Two Pieces Of CLD On The Outer Door Skin. One By The Speaker, The Other By The Door Handle. Each piece Is About 6X6 Inches. (I Added Two 12X6 CLD Tiles Above The Crash Bar And One 6X6 Tile By The Speaker.) There Is Nothing On The Inner Door Skin. The Inner Door Skin Has A Lot Of Metal Folds In It Does not Resonate Much.(I Did Not Add Anything To It). TheTrim Panel Has Nothing On It. (i Added a Layer Of MLV, A Layer Of 3M Thinsulate Acoustic 1/4 Inch Thick. And Filled The Spaces In The Door Trim With Thinsulate.)
Front Seat Foot Wells: There Is What Looks To Be Sound And Heat Insulation Here. Closed Cell Foam, 1/8 inch MLV?, styrofoam, And Jute. As We All Know, There is Room For Improvement Here. (I Added A Layer Of MLV From As High on The Heat Shield As I Could Get All The Way To The Front Mounting Point Of The Front seats. The Same Layer Went Up The Sides Of The Footwell From The Center Counsel Trim To The Door Sill.)
|