Quote:
Originally Posted by Danklvr
try this simple test in your frs.
car off shift into reverse
while in reverse, depress clutch and start frs.
if cam is working, h/u isnt seeing reverse cam power on bootup
if cam is no still no workie, you didnt tap correct reverse signal wire
those are the 2 most common problems anyway
what harness and cam did you get? 12v cam or 5v?
|
We already tried those 2 and still didn't work. And for tapping into the wrong wiring... even if we did, then it shouldn't have worked on my friend's Subaru stock touchscreen HU.. All we did was remove my HU and replaced it with his and when we shifted into reverse, it worked so I don't think we tapped into the wrong wiring.
It's a 12V Cam using this harness:
http://www.autoharnesshouse.com/19867.html