Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

torqdork · 01-25-2015, 01:03 PM

Fronts measured about 1/4" material left on each pad, rears about 3/8" material left on each pad. Pads were switched l/r sides of car for each track day, not sure if that evens wear or not but fr and rr pads measured the same on both sides. Brownish residue on backing plates is from high-temp copper lube applied before each use.

01-25-2015, 01:03 PM	#4
torqdork Senior Member Join Date: Apr 2013 Drives: RV-7 Location: Out West Posts: 1,818 Thanks: 1,042 Thanked 893 Times in 562 Posts Mentioned: 45 Post(s)	Fronts measured about 1/4" material left on each pad, rears about 3/8" material left on each pad. Pads were switched l/r sides of car for each track day, not sure if that evens wear or not but fr and rr pads measured the same on both sides. Brownish residue on backing plates is from high-temp copper lube applied before each use.