|
Anywhere is fine. I mounted mine to a small piece of breadboard with a wiring block on it and found a spot in the dash on each side. Amp wires go to the board, wires out of the board go into the doors. There is no reason why you couldn't put the coils back where the amp is.
As far as the crossover point, as chimera said you can just eyeball it. Or listen to your favorite music and let your ear decide. If the xover is set too high the sub will sound muddy, too low and it won't output the volume of bass you want. With the range you have listed, halfway through the adjustment range would result in 95 Hz, 1/4 from low would be 67.5 Hz.
|