Just an FYI, I've changed some fine learning settings and now it's creating FLKC at low load like 0.1-0.3 etc. I've not changed any tables that should result in that so I was wondering if anyone had done the same? I'm currently on the A01G ROM, based on the fact that the A02G is defined the same I'll assume it's the same. Anyone tried on different ROMs?
What I've changed:
Fine Correction Retard Value - It still retards -1 no matter what I do.
Load Range - I've only adjusted the upper range
Rows and Columns for the FL Table in ROM - I've not set the lowest ranges any lower than stock.
TBH, it's stumped me a little. I was wondering if, like the Injector scaling, that maybe the ECU is using different parameters/settings.
Quote:
Originally Posted by Toyota John
Hook me up a C ROM
|
Sorry John, missed this. It's all time, of which I have very little at the moment. When my house is done I'll try and copy across the G series definitions to the C series.