Quote:
Originally Posted by yomny
Thats alright man, you've been plenty helpful. I was going to tackle this without removing the TB only to find out it was probably necessary then have nightmares on whether i needed to run to the dealer to grab a gasket. You saved me all that. I just got myself plenty of clamps and port caps to block off and clamp anything necessary.
|
Glad I could help.
I found that the hoses required different sized clamps to get a tight fit, as well. I can't remember the exact sizes, but a little trial tug on each will let you know for sure. I believe I used a stainless core zip tie (as well as the clamp) on one for peace of mind, but the Dorman clamps that I used were pretty crappy so ymmv.