[finch1750]

Originally Posted by steve99

Torque app will read calibration id from ECU

For USA/canada guys any calid earlier then ZA1JA01C manual or ZA1JA01D auto ie 700C 900C A00C (or D) revisions don't have DI seal fix (transient ignition retard enabled).

B00C and B01D were idle stability fixes when A/C switched in/out


I believe their is a TSB to flash older cars to B01C/D

D00C/D is for My2015 cars only.

11-136-14_Idle_Stability.pdf

S-SB-0040-13-RPM Drop.pdf

for all TSB see here

www.ft86club.com/forums/showpost.php?p=548473&postcount=1


or just do it yourself with Tactrix/ecuflash see link below, stock rom their as well

www.ft86club.com/forums/showthread.php?t=62332

most tunes will bump you to latest compatable rom for car as well as tune changes.

When I check the calibration ID under adapter atatus it only says ZA1 without giving me the full reading. I am very curious as I have a early production model but had my ecu replaced in Feb 2013.