01-09-2015, 08:05 PM
|
#1392
|
|
Senior Member
Join Date: Aug 2013
Drives: None
Location: Tx
Posts: 1,271
Thanks: 1,269
Thanked 142 Times in 122 Posts
Mentioned: 6 Post(s)
|
Quote:
Originally Posted by protpibe
Kind of. It started with very slight oil burning smell at the occasional red light and very small drips of oil on my garage floor. I thought it was the cam plate, but redoing it a few times left me with the same occasional oil drip. By fluke when I was replacing my injectors, I found a small oil deposit by the oil pickup line on top of the block. After Redoing the high temp Teflon on the threads and stacking 2 fresh crush washers, the problem was solved. The reason I mentioned it earlier was because I thought for sure it was a valve cover gasket too, but redoing that oil tap fixed it. Before storing the car a few months ago, I'm at about 10,000km with no leaks.
|
Did yours look something like this basically?
|
|
|