View Single Post
Old 01-06-2015, 11:22 PM   #1391
protpibe
Senior Member
 
protpibe's Avatar
 
Join Date: Oct 2013
Drives: 4-Runner Sport - 13' BRZ SportTech
Location: Winnipeg
Posts: 1,395
Thanks: 253
Thanked 839 Times in 459 Posts
Mentioned: 18 Post(s)
AVO Turbo Kit Owners Topic

Quote:
Originally Posted by Astroboy View Post
So I took a look under their oil line Where you told me to look for and sadly I encountered dirty oil build up in that area, but not necessarily from the line... it seemed like it was coming from the the cylinder head. The silicone around it was dealing off like bubble gum... so now I have an oil leak at the scavenger pump at the camplate, top of the head, and oil pan! Have you encountered numerous oil leaks like me?

Kind of. It started with very slight oil burning smell at the occasional red light and very small drips of oil on my garage floor. I thought it was the cam plate, but redoing it a few times left me with the same occasional oil drip. By fluke when I was replacing my injectors, I found a small oil deposit by the oil pickup line on top of the block. After Redoing the high temp Teflon on the threads and stacking 2 fresh crush washers, the problem was solved. The reason I mentioned it earlier was because I thought for sure it was a valve cover gasket too, but redoing that oil tap fixed it. Before storing the car a few months ago, I'm at about 10,000km with no leaks.
__________________
Top Tier Imports - Check out my build journal HERE
protpibe is offline   Reply With Quote